Bells and Leadpipes
Three construction styles:
Lightweight - lighter braces, thinner gauge brass, perfect lead trumpet
Classic - 60 years of Domenick's work created this original design
Ultra - heavy weight trumpet, heavy gauge brass, receiver, and caps.
Four known bore sizes:
M (.453")
ML (.460")
MLP (.4625"/approx. 11.75mm)
L (.468")
Four bell shapes with up to 6 inch bell:
#1 - C trumpet bell
#1s - smooth taper helps create full spectrum of overtones, dark to bright
#2 - fewer overtones, more diffused, blending sound
#3 - very large bell--dark, wide sound
1s bell
This is the bell that set the standard for all commercial bells to follow. Developed in the 60's by Domenick to meet the demands of studio trumpet players in Los Angeles, it remains the mainstay of the professional commercial trumpet playing community to this day. Its unique bell flare design gives projection, focus and sound quality unsurpassed in the industry. It can be played with any leadpipe and will produce the core, density and sparkle that has been cherished by top professionals for over 40 years.
2 bell
This bell has slightly larger flare than the 1s bell, which gives it a broader core, while still generating that burnished, vibrant Calicchio sound. Warm, yet sizzling, the 2 bell projects to the back seats of any auditorium or theater, with the benefit of blending well in the section. Used by top professionals throughout the years, it can be heard in top showrooms from Las Vegas and Broadway to Monte Carlo and beyond. This bell will offer you lightning-quick response and flexibility that is unique to the Calicchio bell design.
3 bell
This is the largest-flared bell that Calicchio offers. If you like a broad, warm, lush sound surrounding a powerful core and dense timbre, then this is the bell for you. It is used by lead, solo and section players alike, as the sound can be molded to fit any particular need. With the 2 or 3 leadpipes, it can handle the rigors of any lead or show book, but with the 7 or 9 pipe, it takes on a flavor reminiscent of the vintage Meha Bessons and large bore Martin Committee models. Big, warm, luxurious, fluid, and powerful are all words that describe the magic of this bell.
Known leadpipe shapes:
#1: No info
#2: Open venturi, free blowing, brilliant sound
#2s: The #2 leadpipe but with a smaller venturi
#3: More efficient, brighter sound
#4: No info
#5: A little less distinct slotting, with a spread sound similar to the Martin Commitee
#7: Smaller venturi, football shaped taper, warmer sound
#8: No info
#9: Largest lead-pipe, warmest sound
#10: Similar to the #2 with a slighly tighter feel with excellent projection
#2 leadpipe - 0.348" venturi
This is the world-renowned leadpipe - great for any situation. Its unique design provides lightning-quick response with a very open air column. The 2 pipe gives the player the ability to play at any volume with immediate, clean attacks and a large, focused sound.
#3 leadpipe - 0.339", 0.341", and 0.343" venturi options
This leadpipe has the unique quality of being a very efficient, streamlined leadpipe that offers a solid core to your sound and ease of control in all registers. Although it is well-suited to the larger bells, it works well in conjunction with the 1s bell as a slightly more contained alternative to the 2 pipe
with a slightly warmer sound.
#5 leadpipe
This pipe has much less distinct slots for those who prefer the feel of the vintage Martin Committee. Similar to the 7, this pipe has resistance earlier in the air column. A very dark and diffused leadpipe, the 5 is very unique!
#7 leadpipe - 0.344" venturi
One of Domenick's original designs, this leadpipe brings more resistance to the front of the horn. The 7 pipe produces a warmer sound with a bit more to blow against. It's a wonderful leadpipe for more intimate situations.
#9 leadpipe - 0.351" venturi
The 9 pipe is our most free-blowing leadpipe. It gives you complete control of the trumpet, but allows you to play at any volume with ease and comfort, while always yielding a broad, gorgeous sound. If you like room to blow, yet still need a sharp, smooth attack, this is the choice.
#10 leadpipe - 0.339" and 0.341" venturi options
The last leadpipe that Domenick developed has a very bright sound with exceptional focus and wonderful projection. Extremely responsive, the 10 pipe is the least-known and most focused, which is well-suited for the loudest playing situations. According to Beverly Music Co., the 10 pipe matches the taper of the vintage King Silver Flair 1055T.
(back to top)
Standard
STANDARD MODELS 2019 PRICES NEW (EDITOR'S NOTE: NOT CURRENT)
Raw-$3695.00 Silver-$3995.00 Gold-Quote
1s/2 (1s bell with a 2 leadpipe available in all three bore sizes)
"Trompeta, di tutti trompeta " is how Domenick described this model. Its strong, rich, focused sound with the well known Calicchio characteristic efficiency and ease of playing lend themselves to the demands of the modern trumpet player. With an open upper register and quick response, it will allow you to either lead a section with its effortless projection, play a solo with a lyrical, haunting sound or sit in the section and blend with any and all you meet. Available in 1s/2M(.453), 1s/2ML(.460) and 1s/2L(.468). ML is the most popular.
1s/7 (1s bell with a 7 leadpipe available in all three bore sizes)
The 1s/7 is Calicchio's trumpet that is considered by many to be the workhorse of the line. It easily fits into all playing situations with its versatility and rich sound from the full low register to the extreme altissimo range. The sound is fat and consistent no matter what octave you're in. It, too, has that distinctive Calicchio sound and ease of playing that makes this model a favorite with all types of players, young and old, pro or amateur. Available in 1s/7M(.453), 1s/7ML(.460) and 1s/7L(.468). ML is the most popular.
1s/9 (1s bell with a 9 leadpipe available in all three bore sizes)
With the free-blowing #9 leadpipe in combination with the very efficient 1s bell, this model will give the player a rich, broad sound, but with that big, dense core of sound that all Calicchios are noted for. It still has a quick response and sonorous, overtone-rich sound, with very open upper and lower registers that can bring you to new heights of playing. Available in 1s/9M(.453), 1s/9ML(.460) and 1s/9L(.468). ML is the most popular.
1sZ/3rL (Light Bronze 1s bell with a 3 reverse leadpipe in Large bore)
This is the newest model offered by the Calicchio company and is the first that was designed by John Duda and his Tulsa team. Still utilizing Domenick's engineering principles, this large bore model features the very efficient reversed #3 leadpipe and the lightweight bronze "Z" bell. Lacking the tubbiness usually associated with a large bore horn, the 1sZ/3rL is the model of efficiency and sizzle. Its streamlined sound and warm projection are unmatched by any other trumpet on the market. Also available in 1sZ/3rM(.453) and 1sZ/3rML(.460).
2/9 (2 Bell with a 9 leadpipe available in all three bore sizes)
The #2 bell has a slightly larger flare than the 1s bell, but still retains the legendary playing characteristics of all Calicchio bells. The rich, full, lush sound has a dense core that is broad yet focused, ideal for any type of playing from the recording studio to the largest live theater. The combination of this bell with the #9 leadpipe is great for playing with a big, full brassy sound that can project very well under all circumstances. Great for both lead and section playing, it's all up to you.
3/9L (3 Bell with a 9 leadpipe in Large bore)
Due to the high demand for this model, the once custom-only configuration is back as a standard offering. The marriage of the large #3 bell and the open #9 leadpipe produces a lovely, full sound with an open air stream, making this a favorite among small band players and soloists alike. Extreme versatility and loads of personality make this a wonderful choice for lead players looking for a wide open horn with lots of character. Frequently referred to as the "Freddie Hubbard" model, it offers the player much more than a mere name can describe. Also available in 3/9M(.453), 3/9ML (.460) and 3/9ML Plus(.4625).
3L/3rL (Lightweight 3 Bell with a 3 Reverse Leadpipe in Large bore)
Another Tulsa Calicchio original now offered as a standard model, this combination gives you maximum efficiency with the broadest, sound imaginable. With that Calicchio sound that covers the spectrum of intense to lyrical, the #3 leadpipe lets you handle any playing situation comfortably and the large, lightweight weight #3 bell lets you sing over a section or blaze thru a solo with ease. You have to try this one to believe it. It's like no other trumpet on the market today. Also available in 3L/3rM(.453) and 3L/3rML(.460).
(back to top)
Red Brass
RED BRASS MODELS 2019 PRICES NEW (EDITOR'S NOTE: NOT CURRENT)
Raw-$3695.00 Silver-$3995.00 Gold-Quote
R-32 (Heavy Red Brass 3 bell with 2 leadpipe available in all three bore sizes)
Balances the responsive and open #2 leadpipe with a big R3 bell. This trumpet maintains a quick response and a consistent sound and feel throughout all registers. This is a very versatile instrument. From a beautiful warm tone to a sizzle when pushed. Also available in
R-32M(.453), and R-32L (.468). R-32ML (.460) is the most popular.
R-37 (Heavy Red Brass 3 bell with 7 leadpipe available in all three bore sizes)
Features thick tubing for the leadpipe & tuning slide. Heavy bottom caps further enhance an already solid sound and feel. This trumpet is heavier and darker sounding than our other models, yet still possesses a rich lyrical quality. Also available in R-37M(.453),and R-37L(.468). ML(.460) is the most popular.
(back to top)
Ultra
ULTRA MODELS 2019 PRICES NEW (EDITOR'S NOTE: NOT CURRENT)
Raw-$3995.00 Silver-$4295.00 Gold-Quote
U- 3/9 (Brass 3 bell, 9 leadpipe, heavy construction in all bore sizes)
Our biggest, heaviest Ultra model is very freeblowing with a huge, rich sound. With the large #9 pipe with the big #3 bell, this model is ideal for jazz and legit work. When made in large bore, this horn will accept everything you can give it! Available in U-3/9M(.453), U-3/9ML(.460), and the most popular U-3/9L(.468)
U-1S/7 (Brass 1s bell, 7 leadpipe, heavy construction in all bore sizes)
Focused and full, this trumpet has the same air column as our 1s7. Heavy leadpipe, tuning slide, bell and receiver provide a full, rich sound with quick, even response characteristics. All horns in the Ultra line feature additional bracing, which increases projection. Ideal for any serious musician. Available in U-1s/7M(.453), U-1s/7ML(.460), and U-1s/7L(.468).
U-2/9 (Brass 2 bell, 9 leadpipe, heavy construction in all bore sizes)
Utilizing the 2 bell with a flare slightly larger than the 1s bell gives the player a bit more feedback, while blending well with others. The open warm #9 pipe in this heavyweight design makes this a wonderfully warm instrument with a large body of sound. Well-suited for the orchestral player or soloist. Available in U-2/9M(.453) U-2/9ML(.460) and U-2/9L(.468).
(back to top)
Copper
COPPER MODELS 2019 PRICES NEW (EDITOR'S NOTE: NOT CURRENT)
Raw-$4195.00 Silver-$4495.00 Gold-Quote
3/9 Copper Solo
The Copper Solo elevates copper trumpets to a new standard of excellence. More rounded bends in the bell and the unbraced reverse tuning slide enhance the harmonics resulting in a more conical sound. All of the slide sections feature positive air flow to ensure a smooth, open blowing horn. Thick copper combined with minimal bracing provides a rich sound that lets the instrument sing for you, while maintaining the classic Calicchio sparkle. Although it was designed with the 3 bell and the 9 pipe, other combinations are available upon request. A true original!
Model shown is "Raw" with forward 2nd slide on heavy body with old style 1st slide thumb throw and Bach style 3rd slide stop and 3rd slide pull slide. Heavy reciever and heavy bottom caps.
(back to top)
Custom
CF-1s/2
If you have been one of the lucky few to play Chuck's horn and want an instrument built to his specifications, this is it. Play the same horn as Chuck with the Findley Custom Model. This trumpet was designed with Chuck's input to his exact specifications, which involves custom modifications and design features to meet his demands.
DT-S1s/3M
Designed in conjunction with Dave Trigg, this model features a 3 pipe with a S1s bell that creates a smooth and open blow. Dave's horn was designed for those who prefer a smaller bore horn with that fat, rich Calicchio sound. The balanced resistance facilitates dynamic response with robust results throughout the entire range of the horn. The dead bell (S1s) gives more breadth to the sound with an abundance of projection.
(back to top)
Calicchio Copper Flugel
The Calicchio Flugelhorn continues a sixty year tradition of innovation and inspiration.
The Flugelhorn is now available in three models, a Copper model with a 6.5 inch bell Red Brass and a Brass model with 6 inch bell. All models come with 3rd slide trigger. Finished either Raw, Lacquer, Silver, or Gold
2019 PRICES NEW (EDITOR'S NOTE: NOT CURRENT)
Copper model with a 6.5 inch bell
Raw-$4295.00 Silver-$4595.00 Gold-$Quote
Red Brass model with 6 inch bell
Raw-$3895.00 Silver-$4195.00 Gold-Quote
Brass model with 6 inch bell
Raw-$3695.00 Silver-$3995.00 Gold-Quote
(back to top)
Trombone (Slide Trumpet)
The Calicchio Slide Trumpet / Soprano Trombone
This featured Calicchio slide trumpet — officially a member of the soprano trombone family — was created by Domenick in the early 1970s. This slide trumpet emulates the sizzle and projection characteristics of Calicchio's flagship bell, but has a broader, trombone-like lower and middle registers compared to its valved counterpart. The functional lyrical range of the slide trumpet extends from Low F# through High C, but with the right mouthpiece it can produce a solid presence and sparkle through Double High C and beyond.
This slide trumpet comes equipped with a detachable, two-piece 4.25" Calicchio 1s bell in ML Bore (.460") modified to have an enlarged throat and bell flare. The bell is made of yellow brass, while the slide section has (unplated) nickel silver tubing. The mouthpiece receiver accepts standard trumpet mouthpieces, and while there's no equivalent of a leadpipe, the blow is similar in feel to a #9 pipe.
The Calicchio slide trumpet was primarily popularized by Chuck Findley. It's unclear how many slide trumpets were ultimately made by Domenick, and there's no serial number stamped on any component of this instrument.
PHOTOS: A silver plated Calicchio 1s slide trumpet manufactured in the early 1970s and restored by Mike Paulson and Charlie Melk in Summer 2021. This is not Chuck Findley's slide trumpet.
(back to top)
Trumpet Mouthpieces
Domenick Calicchio was responsible for US patent #2,273,177 related to pitch-modifying mouthpieces (1942), and had a considerable influence on mouthpiece design innovation. Domenick once worked with Burt Herrick before Burt went on to work independently (and eventually with Marcinkiewicz Music Products).
See the Calicchio-Williams site for faithful reproductions and/or innovations on previous Calicchio trumpet mouthpiece designs.
Catalogs and Spec Sheets
Calicchio Specifications
Calicchio Vintage Catalog (Excerpts)
Calicchio Standard
Calicchio Standards Continued
Calicchio R Series and Ultra
Calicchio Ultra Continued and Copper Solo
Calicchio Custom
Calicchio Flugle
(back to top)
|
